Coloured Heavy Duty

Easy opening Coloured Heavy Duty polythene layflat tubing in Black, White, Blue or Red. Available in a range of widths. All food safe, heat sealable and recyclable. The black tubing is slightly thicker than the other colours giving slightly more opacity and strength.

Read more...

  • Please note - this film is not UV stable, and will break down over time if exposed to sunlight. Only use this outside for limited periods, and as a temporary solution. We are able to quote for UV stable film as a bespoke order - please get in touch or read more here
  • This tubing would be suitable for use as temporary air ducting tubing.
  • The width is measured folded flat, it is not the diameter - Watch our video guide below to see how to measure this tubing and make sure your product will fit inside. These rolls have a manufacturing tolerance of +/-10% on width, length and gauge. Samples available to check size.

Watch our video about "Coloured Heavy Duty Layflat Tubing" - use the full screen option to see in the best quality.

Set Descending Direction
View as Grid List

12 Items

per page
  1. Red Coloured Heavy Duty Layflat Tubing 12in - 305mm x 139m
    PTR5012
    From: £302.0000 for 2
Set Descending Direction
View as Grid List

12 Items

per page

Polythene Layflat Tubing Video Transcript

Layflat tubing is an endless and seamless tube of polythene in exactly the state it comes from the extrusion machine. I’m going to explain how we measure the tubing and how to choose the right size layflat for your needs. I’ll be using the example of 4” layflat but it comes in many different sizes.


4 inches is the width of the tubing when its laid out flat. In other words, it is half the circumference of the tube. This width is the measurement you will find on our website and in our catalogue. The diameter of the tubing (so the distance across the circular) is not therefore 4 inches and would not fit 4” diameter tubing inside. To fit over a pipe with a 4-inch diameter, the layflat circumference must be calculated. Let me show you how to do it. Take the diameter of your pipe – 4 inches, and multiply it by 3.142 (commonly known as Pi). This is the circumference of the tubing. And it comes to 12.568 inches. To get the layflat width you need to half this measurement. This comes to 6.284 inches. So, to fit a 4-inch diameter pipe inside layflat you will need layflat with a 6.248-inch width. The nearest size we stock is 7 inches. A nice fit, with a little space. Next comes the duty.


Polythene layflat tubing comes in 3 duties. Medium duty, Heavy Duty and Ultra Heavy Duty. Here are two examples to help you decide on the duty you need. Firstly - which duty would you need to hold steel angle iron? For this the medium duty wouldn’t be heavy enough. Heavy duty would be fine with limited handling, but we’d recommend Ultra Heavy Duty if you are going to dispatch with an outside carrier. How about curtains? Medium duty would suffice to hold curtains but not for shipping by carriers. For that we’d recommend Heavy Duty.